Minerals | Free Full-Text | Accelerating Copper Leaching ...

A extraction of 63% was obtained by pretreated ore in mini-columns using a solution of 6.3 g/L of sodium nitrate and 20 g/L of chloride at pH 1 and a temperature of 25 °C. Raising the temperature and increasing the chloride concentration did not improve extraction rates under the studied conditions.

relate product

Leave a Message

Here you can submit any questions and we will get back to you as soon as possible. We will not disclose the information you submit to anyone, please rest assured.

latest news

  • ACID LEACHING PROCESS FOR TREATING HIGH GRADE NICKEL ...

    ACID LEACHING PROCESS FOR TREATING HIGH GRADE NICKEL ...

    In order to minimize dissolution of copper values in the first stage leach, preferably the flow of return electrolyte is carefully regulated to maintain the pH in the latter stages of the first stage leach at about 4.

  • Pitting Corrosion of Copper in Waters with High pH and Low ...

    Pitting Corrosion of Copper in Waters with High pH and Low ...

    Description: Localized or pitting corrosion of pipes used in household drinking-water is a problem for many water utilities and their customers. Extreme attack can lead to pinhole water that may result in water damage, mold growth, and costly repairs.

  • Heap leaching -

    Heap leaching -

    Heap is an industrial mining process used to extract precious metals, , uranium, and other compounds from ore using a series of chemical reactions that absorb specific minerals and re-separate them after their division from other earth materials. Similar to in situ mining, heap mining differs in that it places ore on a liner, then adds the chemicals via drip systems to the ...

  • WO2014030048A1 - Heap leaching method - Google Patents

    WO2014030048A1 - Heap leaching method - Google Patents

    A process of extracting from sulphide minerals which is enhanced at solution potentials exceeding 700 mV SHE, in the absence of any microorganism, by contacting the minerals in a pre-treatment phase using an acid solution at a high chloride content containing dissolved .

  • The effects of pH on copper leaching from wood treated ...

    The effects of pH on copper leaching from wood treated ...

    The blocks treated with amine-based preservatives significant amounts of at pH levels below 4.0. At all pH levels, the CuHDO-3-treated samples generally the most followed by the samples treated with ACQ-2, CUAZ-3, and CCA-3.

  • PDF Bioleaching of Copper and Iron from Grasberg Ore ...

    PDF Bioleaching of Copper and Iron from Grasberg Ore ...

    The results indicated that the extraction at pH 1.5 was 1.5 and 1.4 times that at pH 1.0 and pH 2.0 respectively. The extraction obtained at 45 °C was 1236.8% higher than that at 50 ...

  • Pyrite Leaching Behaviour under CESL Process Conditions

    Pyrite Leaching Behaviour under CESL Process Conditions

    the roles of particle size, oxygen partial pressure, pulp density and Cu addition on the kinetics of pyrite . The present work focuses more on the stoichiometry of the pyrite reaction under conditions specific to CESL’s mixed sulphate-chloride system operating at 150ºC.

  • Allowable Levels of Copper in Drinking Water Should Not Be ...

    Allowable Levels of Copper in Drinking Water Should Not Be ...

     · In 1989 the Institute of Medicine estimated that adults could safely ingest 1.5 to 3.0 mg of dietary per day and infants could consume 0.4 to 0.6 mg per day to good health. Generally, the that people ingest through their daily diet falls within this range, and typically only a small fraction of an individuals ...

  • Reverse Osmosis and Copper Pipes | PerfectWater™

    Reverse Osmosis and Copper Pipes | PerfectWater™

    Pipes. is one of the materials that easily leaches into low TDS water. The will not only into the water which poisoning is detrimental to human health , but the low TDS water will also cause “pitting” in the pipes that leads to pin-hole leaks.

  • Process for the rapid leaching of chalcopyrite in the ...

    Process for the rapid leaching of chalcopyrite in the ...

    2. Over the first 16 days reached about 20% and the improved rate over the rate obtained in Test No. 1 is largely attributable to the increased chalcopyrite surface area resulting from the finer grind. From day 17 to day 21 there was a marked increase in the rate, and extraction reached 85% by day 21.

  • Acidity as a factor in leaching of copper, chromium and ...

    Acidity as a factor in leaching of copper, chromium and ...

    Up to 100% of CCA treatment metals were found to have at pH 3.5, whereas a maximum of 9% of metals at pH 8.5. was found to be higher in citric acid than in dilute sulfuric acid solutions. of , chromium and arsenic was not proportional to the amount of present before leaching.

pc-kf
gotop